Installing new partition for swap space

1. Add new disk in VMWare. In the example it is 3rd disk.
    a. Power off machine
    b. Edit Settings
    c. Add ...   Hard Disk , Next
    d. Create a new virtual disk, Next
    e. Capacity 2GB , Thick provision Lazy Zeroed, Next , Next
    f. Finish
       
2. Create MS-DOS partition table.
    > fsdisk /dev/sdc
    > n (new)
    > p (primary)
    > 1 (first)
    > w (write) 

3. Install and used GUI program gparted
    > sudo apt-get install gparted 

4. Start gparted from Ubuntu GUI.  
   a. Select device GParted / Devices / dev/sdc1 
   b. Device / Create Partition Table , , Apply 
   c. Create partition: Patrition / New /
   d. Create as: Primary Patrition, File system: linux-swap, Label: swap / Add 
   e. Edit /  Apply All Operations 
   f. Partition / Swapon 
   g. GParted / Quit 

5. Make your changes permanent by adding entry to /etc/fstab file: 

mpug@testtool13:/$ vi /etc/fstab

# /etc/fstab: static file system information.
## Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices# that works even if disks are added and removed. See fstab(5).##
/dev/mapper/testtool97--vg-root /               ext4    errors=remount-ro 0       1
# /boot was on 
/dev/sda1 during installationUUID=b36b850c-0a22-4f02-9516-83b80d5a6c1f 
/boot           ext2    defaults        0       2
/dev/mapper/testtool97--vg-swap_1 none            swap    sw              0       0
/dev/sdc1                         none            swap    sw              0       0
/dev/fd0       /media/floppy0  auto    rw,user,noauto,exec,utf8 0       0
/dev/testtool97-disk/disk /disk               ext4    errors=remount-ro 0       1